The 07 KP 93 GJR5253200R1161 communication processor is an interface module with 2 serial MODBUS RTU interfaces. The communication processor allows external units to be connected to the Advant Controller 31 system using the MODBUS RTU protocol.
|
|
|
|
|
07KP93 |
| GJR5253200R1161 | |
|
|
|
|
|
|
|
|
15*15*12cm |
|
|
0.6kg |
The most important features of 07 KP 93 GJR5253200R1161 communication processor are:
· 2 serial interfaces: usable in accordance with EIA RS-232 or EIA RS-485 (COM3, COM4)
COM3 COM4
Master Slave (Master-master does not work)
· Communication with AC 31 basic units is performed with function blocks/connection elements (see also programming software 907 KP 93).
1 Mounting the unit on a DIN rail
2 Mounting the unit with screws
3 6.3 mm Faston earthing terminal
4 24 V DC supply voltage
5 Serial interface COM3
6 Serial interface COM4
9 Networking interface for the Advant Controller 31 basic unit
10 Switch not used
11 LED displays for system messages. Refer to chapter 7.3.4 Diagnosis for further information
12 LED displays for system message.Refer to chapter 7.3.4 Diagnosis for further information
The communication processor 07 KP 93 GJR5253200R1161 can be connected to AC31 basic units of the 90 series, which have a networking interface. The housing of the communication processor is connected to the housing of the AC31 basic unit by a snapfit connection. The electrical connection is via a 40-pole ribbon cable with a socket connector, soldered onto the 07 KP 93 side.
1. Detach the cover on the basic unit from the networking interface.
2. Plug the socket strip of the 40-pole ribbon cable secured to the 07 KP 93 onto the networking connector of the basic unit.
3. Place both units on a level surface and slide them together so that they engage.
4. Slide in the connection part to fix the housing in position.
The Protective Earth is connected to the 6.3 mm Faston terminal via a wire with a across-sectionn of 6 mm² (maximum length 25 cm).
The signals of the interfaces COM3 and COM4 are electrically isolated from each other and also from the internal electronics of the unit.
Communication processor 07 KP 93 R1161 Order No. GJR5 2532 00 R1161
Scope of delivery Communication processor 07 KP 93 R1161 1 5-pole terminal block (5.08 mm grid), cable including terminals for making
Software Order No. GJP5 2072 00 R0102
A: Brand new and original with a one-year warranty.
A: For stock products, we will send goods to you within 2-3 days after receiving the payment.
A: 1. We only accpet 100% T/T before shipping;
2. For items with lead time, a 30% deposit in advance, 70% balance before shipping;
3. If you have an agent in China, please contact us for RMB transfer.